Head Gasket

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Head Gasket [Re: ChrisH] #772255 12/15/06 09:16 PM

Joined: Jul 2004

Posts: 72

Pueblo, Colorado

Volcom

Getting the Wheeling Fever

I took a large piece of cardboard and drew a picture of the front timing cover on it. Then I took the bolts out of the cover and pushed them through the cardboard in their correct places. You need to make sure you use the correct length bolts in the right spots on the timing cover.

Take your time, clean all the parts you can and put it back together. You'll be fine!

Entire Thread
Subject	Posted By	Posted
Head Gasket	Anonymous	12/15/06 12:51 AM
Re: Head Gasket	stock87	12/15/06 01:18 AM
Re: Head Gasket	1986xtracab	12/15/06 01:25 AM
Re: Head Gasket	ChrisH	12/15/06 02:40 AM
Re: Head Gasket	Volcom	12/15/06 09:16 PM
Re: Head Gasket	mnwolftrack	12/16/06 12:50 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 7.200s Queries: 16 (7.195s) Memory: 0.6009 MB (Peak: 0.6339 MB) Data Comp: Off Server Time: 2026-11-02 13:21:32 UTC
Valid HTML 5 and Valid CSS