Idle Adjustment

Print Thread

Rate Thread

Re: Idle Adjustment [Re: Dandeman] #772463 12/23/06 01:04 AM

Joined: Aug 2006

Posts: 30

U.P. OF MICHIGAN

CROWBAR

Getting the Wheeling Fever

I cleaned the throttle body per article & replaced the PCV valve. Still have high idle. With the cooler outside temps now, it starts at 1500RPM & drops to about 1200RPM after about 10 minutes running. Did a visual on the vac hoses didn't see any problems. Is there something else I can try? Where are the idle posistion contacts? Thanks

Entire Thread
Subject	Posted By	Posted
Idle Adjustment	CROWBAR	12/15/06 11:45 AM
Re: Idle Adjustment	Adam F	12/15/06 10:24 PM
Re: Idle Adjustment	CROWBAR	12/17/06 02:02 AM
Re: Idle Adjustment	Adam F	12/17/06 10:55 AM
Re: Idle Adjustment	CROWBAR	12/17/06 12:50 PM
Re: Idle Adjustment	Dandeman	12/17/06 02:27 PM
Re: Idle Adjustment	CROWBAR	12/18/06 12:15 PM
Re: Idle Adjustment	Adam F	12/18/06 09:17 PM
Re: Idle Adjustment	CROWBAR	12/23/06 01:04 AM
Re: Idle Adjustment	Adam F	12/23/06 03:48 AM
Re: Idle Adjustment	dogtoy	12/23/06 05:43 AM
Re: Idle Adjustment	CROWBAR	12/23/06 12:55 PM
Re: Idle Adjustment	Adam F	12/23/06 10:00 PM
Re: Idle Adjustment	CROWBAR	12/27/06 12:34 PM
Re: Idle Adjustment	Adam F	12/27/06 03:35 PM
Re: Idle Adjustment	dogtoy	12/28/06 07:19 PM
Re: Idle Adjustment	dogtoy	12/28/06 07:29 PM
Re: Idle Adjustment	CROWBAR	12/31/06 12:47 PM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social: