bumpers!!!!!

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: bumpers!!!!! [Re: jezeric] #772648 12/17/06 06:21 AM

Joined: Dec 2006

Posts: 45

SAC, CA...NOr CAl

smith123isuzu Offline

Getting the Wheeling Fever

cool thanks for the info....but just a nooooob ?.....what is the 1st and 2nd gen of the rodeo....I know that the frame inside to inside is 36".....I don't care if the bolts match this bumper is to stay.....any ideas

96' Isuzu Rodeo...SaS Dana 44 front & rear. 4.88s',Auburn limited @ both ends, with lot's of other stuff..
Proud member of Cal4WD, TTORA and SN4WD.
Jeepcamping.com
more than just jeep stuff.

Entire Thread
Subject	Posted By	Posted
bumpers!!!!!	smith123isuzu	12/16/06 06:41 PM
Re: bumpers!!!!!	SuperSwamper	12/16/06 07:07 PM
Re: bumpers!!!!!	smith123isuzu	12/16/06 07:30 PM
Re: bumpers!!!!!	smith123isuzu	12/17/06 02:32 AM
Re: bumpers!!!!!	jezeric	12/17/06 03:32 AM
Re: bumpers!!!!!	smith123isuzu	12/17/06 06:21 AM
Re: bumpers!!!!!	Bigpoppax2	12/17/06 02:26 PM
Re: bumpers!!!!!	rodeoredd	12/17/06 08:28 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.497s Queries: 16 (3.495s) Memory: 0.6080 MB (Peak: 0.6410 MB) Data Comp: Off Server Time: 2026-06-11 09:36:55 UTC
Valid HTML 5 and Valid CSS