|
|
|
|
 Trouble code ?
#772696
12/16/06 09:43 PM
|
Joined: Aug 2005
Posts: 229
OP
Wheeler
|
I finished the 3.4 install in my Runner. On its first real highway test it went into what appears to be safe mode.
The cel is on
Pulled trouble codes
P0100
P0101
P0102
P0110
P0141
The first four codes look to be pointing to a failed MAF. The reason I believe this is because for P0101 the MAF is the only trouble spot listed. The MAF is also listed as a possible trouble spot on the other codes. This MAF is a salvage yard part. Any ideas?
The P0141 is the NO. 2 heated O2 sensor. I extended the wires to this plug by soldering in wire. Does anyone know if changing the length of these wires will mess up the reading.
1995 4Runner Limited V6 3.4 Liter 5 Speed 4x4
1995 4Runner V6 Auto 2WD
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.622s Queries: 15 (3.619s) Memory: 0.5928 MB (Peak: 0.6258 MB) Data Comp: Off Server Time: 2026-06-21 00:56:29 UTCValid HTML 5 and Valid CSS 
