Rear end wheel mounting surface to wms?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Rear end wheel mounting surface to wms? #773807 12/20/06 03:23 AM

Anonymous

Unregistered

Can any one help me out with this I am looking for a rear end to put under my 95 YJ (current one is eating bearings and at 3.07 not worth keeping. Would like to know what other rear ends measure out close (like the exploder 8.8 is just a little smaller). All help appreciated.

Entire Thread
Subject	Posted By	Posted
Rear end wheel mounting surface to wms?	Anonymous	12/20/06 03:23 AM
Re: Rear end wheel mounting surface to wms?	BigJim	12/20/06 03:47 AM
Re: Rear end wheel mounting surface to wms?	magsnubby	12/21/06 04:17 AM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.595s Queries: 15 (3.593s) Memory: 0.5915 MB (Peak: 0.6245 MB) Data Comp: Off Server Time: 2026-06-05 22:13:03 UTC
Valid HTML 5 and Valid CSS