Rear end wheel mounting surface to wms?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Rear end wheel mounting surface to wms? #773808 12/20/06 03:47 AM

Joined: Oct 2003

Posts: 7,768

Central Texas

BigJim

Web Wheeler

I think the sploder 8.8 is bout maybe 1-1/2 inches wider on both sides.. I doubt you will find one with a 3.07 however..
You may have to regear the front end to match the rear if you do get another rear that is not matching your front.
It is a lot of work and expense to change rearends.. Maybe you would like it better to find one just like yours..
Big JIm <img src="/forums/images/graemlins/pfft.gif" alt="" />

professional bovine relocation specialist

Entire Thread
Subject	Posted By	Posted
Rear end wheel mounting surface to wms?	Anonymous	12/20/06 03:23 AM
Re: Rear end wheel mounting surface to wms?	BigJim	12/20/06 03:47 AM
Re: Rear end wheel mounting surface to wms?	magsnubby	12/21/06 04:17 AM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.211s Queries: 15 (3.451s) Memory: 0.5969 MB (Peak: 0.6299 MB) Data Comp: Off Server Time: 2026-05-29 20:00:05 UTC
Valid HTML 5 and Valid CSS