Tightening The Crank Bolt

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Tightening The Crank Bolt [Re: casper3t] #774244 12/22/06 12:26 PM

Joined: Jul 2003

Posts: 1,262

Westminster, MD

foxtrapper Offline

Body Damage is Cool

Jam up the serpentine belt with a screwdriver in a pulley. It'll let you get enough torque on the nut.

'97 T-100 SR5
'86 Toyota's, the variety pack (all gone)

Entire Thread
Subject	Posted By	Posted
Tightening The Crank Bolt	casper3t	12/22/06 01:37 AM
Re: Tightening The Crank Bolt	4WD22R	12/22/06 01:55 AM
Re: Tightening The Crank Bolt	cktoy	12/22/06 05:22 AM
Re: Tightening The Crank Bolt	Snowtoy	12/22/06 09:05 AM
Re: Tightening The Crank Bolt	ACES_HI	12/22/06 02:12 PM
Re: Tightening The Crank Bolt	Stevie	12/22/06 02:32 PM
Re: Tightening The Crank Bolt	foxtrapper	12/22/06 12:26 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.767s Queries: 16 (3.528s) Memory: 0.6046 MB (Peak: 0.6376 MB) Data Comp: Off Server Time: 2026-06-09 11:30:16 UTC
Valid HTML 5 and Valid CSS