[image]

AND YES, THAT BUMPER WILL BE EXCHANGED!!!!!!!!! <img src="/forums/images/graemlins/kewl.gif" alt="" /> <img src="/forums/images/graemlins/smile.gif" alt="" />

Currently LOOKING for larger mirrors ......any ideas....????? <img src="/forums/images/graemlins/patriot.gif" alt="" />

Those goofy little 1" round blind spot mirrows work nicley to see wher the track of your tires lie from the drivers seat. They are cheap, but helpful.

Do the flares attach to the underlip of the fender, or to the side? I'm not fond of the idea of drilling holes into the fender flare, underneath would be ok.

They look great, looks like they molded to the curvature nicley. Did you have to warm them to get them that plyable?
<img src="/forums/images/graemlins/kewl.gif" alt="" />

Where did you get the red skid plate?!?

Need to replace mine, but want something that is much thicker. Also looking for a thicker fuel tank skid plate.

Logansportage <img src="/forums/images/graemlins/patriot.gif" alt="" />

You drill into the side of the fender/body mount here. To me, the other way would be to difficult. Especially if you were working alone like me. The trick is to adhere the molding with placement clips or glue and then drill ( unless you have two other people to help ). And DONT make a mistake!!! <img src="/forums/images/graemlins/confused.gif" alt="" />

You guessed it. Bathtub hot water less then 5 minutes.
<img src="/forums/images/graemlins/kewl.gif" alt="" />

I got it from J.Moser (Platargar) to be worked with and already made small mods to it. I'm still in the process phase. 1/4 inch steel and very much double strong then stock(more on that later). Just need to take it off someday and get going <img src="/forums/images/graemlins/kewl.gif" alt="" /> <img src="/forums/images/graemlins/patriot.gif" alt="" /> <img src="/forums/images/graemlins/smile.gif" alt="" />

Do you have an electronic drawing of it?

Logansportage <img src="/forums/images/graemlins/patriot.gif" alt="" />

Got Nerf bars cause my lady can't get in the truck. Also she gave them to me for free... <img src="/forums/images/graemlins/smile.gif" alt="" />!!!!!! Cause her Jeep Commander was to low to the ground and they got in the way of her Legs. Unfortunately they reduce ground clearance like about 3". Although not really sure. They did not fit my truck, but welded to the frame. They compliment the new fender flares <img src="/forums/images/graemlins/kewl.gif" alt="" />....next are tires <img src="/forums/images/graemlins/butwiggle.gif" alt="" /> <img src="/forums/images/graemlins/butwiggle.gif" alt="" /> <img src="/forums/images/graemlins/evil.gif" alt="" /> <img src="/forums/images/graemlins/patriot.gif" alt="" />