Timing Question on 3vze?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Timing Question on 3vze? #775849 12/29/06 05:21 AM

Joined: Apr 2006

Posts: 131

Las Vegas, NV

dogtoy

Wheeler

I do not get an rpm drop when I jump the connector which leads to to the tps. I do not want to spring the dough for a tps right now and am wondering; if my idle is @ 800 and I set the timing at 12-13btdc is this good enough to get me by? I do not detect any pinging but have also heard that sometimes pre-detonation occurs even if you do not hear it. I have a new knock sensor, just wondering if I am going to screw anything up by running like this?

2014 FJ

Entire Thread
Subject	Posted By	Posted
Timing Question on 3vze?	dogtoy	12/29/06 05:21 AM
Re: Timing Question on 3vze?	4Crawler	12/29/06 05:25 AM
Re: Timing Question on 3vze?	Rauch_Off_Road	12/29/06 05:14 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.470s Queries: 15 (3.468s) Memory: 0.5964 MB (Peak: 0.6294 MB) Data Comp: Off Server Time: 2026-06-23 22:47:32 UTC
Valid HTML 5 and Valid CSS