Rear brakes were bouncing the rear end when I was stopping, and figured the drums were worn out, so I bought some new drums from Pepboys and the hub holes were about 1/8" too small in diameter. I figured the drums, like the rims were lug-centric, so I just die-grinded out the center hole.
Well, the rear is still bouncing, and I wonder if its the drums still after having them cut, or if its the shoes, or something else??

thanks

1994 Yota 4x4 Short cab
5spd 22RE
Mostly Stock, but I'm learnin'!
31x10.50s