|
|
|
|
Re: Cleaning Head, Bolts, and Engine Parts
#777413
01/05/07 11:32 PM
|
Joined: Oct 2000
Posts: 669
Rock Warrior
|
You could also have it hot tanked, assuming your machine shop has a setup for aluminum.
22REturbo.net 1988 4Runner 22RTE core, turbocharged, megasquirted...
|
|
|
Entire Thread
|
Cleaning Head, Bolts, and Engine Parts
|
Anonymous
|
01/05/07 05:17 AM
|
Re: Cleaning Head, Bolts, and Engine Parts
|
Volcom
|
01/05/07 08:06 PM
|
Re: Cleaning Head, Bolts, and Engine Parts
|
Anonymous
|
01/05/07 10:08 PM
|
Re: Cleaning Head, Bolts, and Engine Parts
|
dcg9381
|
01/05/07 11:32 PM
|
Re: Cleaning Head, Bolts, and Engine Parts
|
CJM
|
01/06/07 01:42 AM
|
Re: Cleaning Head, Bolts, and Engine Parts
|
Anonymous
|
01/06/07 04:29 AM
|
Re: Cleaning Head, Bolts, and Engine Parts
|
KiwiCowboy
|
01/06/07 05:11 AM
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.715s Queries: 15 (3.713s) Memory: 0.6032 MB (Peak: 0.6362 MB) Data Comp: Off Server Time: 2026-06-03 14:35:32 UTCValid HTML 5 and Valid CSS