TJ Header Installation

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

TJ Header Installation #777631 01/05/07 11:51 PM

Joined: Sep 2005

Posts: 29

kalaniwavo Offline

Getting the Wheeling Fever

Ok, I just received my new Borla Headers for my 05' TJ 6 cylinder. They are the new 2 piece headers that run into the precats. Quite a bit different than the old style headers.

Does anyone have any installation experience installing this new (2000-2005) style header? I'm working by myself on this one and really only have one full day to do it. ANY info, tips, tricks, etc... would be greatly appreciated!

Thanks
Nick

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 1.748s Queries: 14 (0.004s) Memory: 0.5807 MB (Peak: 0.6205 MB) Data Comp: Off Server Time: 2026-06-07 09:36:03 UTC
Valid HTML 5 and Valid CSS