I have a vibration problem with my 2001 4 runner 4X4 so I crawled under to take a look for anything that may be worn. I only have 55,000 mostly street miles on it so I would not expect much wear.

I did find that the rear drive shaft that fits into the transfer case has a little play when moved up and down and left and right (Not pushing or pulling in and out).

What else could be causing the vibration, I get vibration at around 30 mph and from 65 to 73 mph.

I am thinking a bearing is worn and is causing the vibration. Anyone have ideas or suggestions? Is this a easy fix, are special tools needed? Maybe it doesnÆt need fixing?


Another question. Replacing shocks. I know the rear shocks are easy but what about the front shocks? 90+% of my driving is on the street so what is a good shock to buy?
55,000 miles, do they need replaced?

Thank you for your help and suggestions
Don