1989 SAS questions

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

1989 SAS questions #778080 01/07/07 07:20 PM

Joined: Aug 2005

Posts: 70

Leonville, Louisiana

maxxis85

Getting the Wheeling Fever

on reassembly of the birf's. i know to pack the ***** out of the joint it self. Do i pack the inner cee with grease too? How much grease goes into the knuckle itself, and around the outside of the inner cee?
BTW axle is all apart and waiting on my SAS kit to be ordered and shipped. Then its time to gear the 3rd to 5.29's and put axle together with all new bearings seals, etc

1989 TOYOTA PICKUP 4"trailmaster, 3" Body Lift 8,000 lb warn winch, q-78 tsl super swampers

Entire Thread
Subject	Posted By	Posted
1989 SAS questions	maxxis85	01/07/07 07:20 PM
Re: 1989 SAS questions	OOP'S	01/07/07 08:32 PM
Re: 1989 SAS questions	maxxis85	01/08/07 04:39 AM
Re: 1989 SAS questions	maxxis85	01/11/07 02:28 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.657s Queries: 15 (3.655s) Memory: 0.5972 MB (Peak: 0.6302 MB) Data Comp: Off Server Time: 2026-06-08 04:58:41 UTC
Valid HTML 5 and Valid CSS