1989 SAS questions

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 1989 SAS questions [Re: maxxis85] #778083 01/11/07 02:28 PM

Joined: Aug 2005

Posts: 70

Leonville, Louisiana

maxxis85

Getting the Wheeling Fever

Here is another question i have for you guys. My axle i bought had the auto hubs on it. well i did get toyota aisin hubs for pretty cheap to do the swap. My question is, I had a bolt that held the axleshfat like on my current IFS setup. Will i have to get a c-Clip for the end of the Stub Shaft or can I use the same retaining bolt in the axle?

1989 TOYOTA PICKUP 4"trailmaster, 3" Body Lift 8,000 lb warn winch, q-78 tsl super swampers

Entire Thread
Subject	Posted By	Posted
1989 SAS questions	maxxis85	01/07/07 07:20 PM
Re: 1989 SAS questions	OOP'S	01/07/07 08:32 PM
Re: 1989 SAS questions	maxxis85	01/08/07 04:39 AM
Re: 1989 SAS questions	maxxis85	01/11/07 02:28 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.506s Queries: 16 (3.503s) Memory: 0.5989 MB (Peak: 0.6319 MB) Data Comp: Off Server Time: 2026-06-09 01:31:17 UTC
Valid HTML 5 and Valid CSS