Pilot bearing

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Pilot bearing [Re: Bigpoppax2] #778575 01/10/07 01:54 AM

Joined: Aug 2000

Posts: 4,868

Mount Vernon, WA, USA

Jim_Paget

Roll Me Over

I once took one out of an RX-7 by using a die grinder to cut nearly through the pilot bearing, then using the cold chisel. Of course I have a Metalbo variable speed die grinder with a three-foot flex shaft and a tungsten rotary rasp from Boeing surplus.

Jim Paget
88 YJ with a few changes

www.rrr4x4.com

Entire Thread
Subject	Posted By	Posted
Pilot bearing	Billdo	01/09/07 05:48 PM
Re: Pilot bearing	Richard Saylor	01/09/07 07:01 PM
Re: Pilot bearing	RobG	01/09/07 07:12 PM
Re: Pilot bearing	dvtrooper	01/09/07 07:40 PM
Re: Pilot bearing	Billdo	01/09/07 07:48 PM
Re: Pilot bearing	mlclark	01/09/07 09:26 PM
Re: Pilot bearing	Bigpoppax2	01/09/07 09:53 PM
Re: Pilot bearing	Jim_Paget	01/10/07 01:54 AM
Re: Pilot bearing	Wareagle	01/10/07 02:13 AM
Re: Pilot bearing	Bigpoppax2	01/10/07 01:33 PM
Re: Pilot bearing	Billdo	01/15/07 10:10 PM
Re: Pilot bearing	Billdo	01/19/07 05:53 PM
Re: Pilot bearing	JLEMOND	01/19/07 06:36 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.472s Queries: 16 (3.470s) Memory: 0.6186 MB (Peak: 0.6516 MB) Data Comp: Off Server Time: 2026-06-05 03:48:45 UTC
Valid HTML 5 and Valid CSS