Refinishing Factory Aluminum wheels

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Refinishing Factory Aluminum wheels #778723 01/10/07 04:18 AM

Joined: Jan 2007

Posts: 241

Aurora, Ontario

canuck

Wheeler

I've got a 1987 extra cab with factory aluminum wheel. Due to age and the fact we use a lot of road salt up in Canada the wheels have pitting and corrosion. What is the best to refinish them. I noticed there is a heavy plastic finish on them.

Keep the Shiney Side up. Support our troops.

Entire Thread
Subject	Posted By	Posted
Refinishing Factory Aluminum wheels	canuck	01/10/07 04:18 AM
Re: Refinishing Factory Aluminum wheels	AUSSiE78	01/10/07 04:45 AM
Re: Refinishing Factory Aluminum wheels	bkg	01/10/07 05:01 AM
Re: Refinishing Factory Aluminum wheels	willzrunna96	01/10/07 05:13 AM
Re: Refinishing Factory Aluminum wheels	4Crawler	01/10/07 06:42 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.620s Queries: 15 (3.618s) Memory: 0.6004 MB (Peak: 0.6334 MB) Data Comp: Off Server Time: 2026-06-17 12:28:23 UTC
Valid HTML 5 and Valid CSS