Refinishing Factory Aluminum wheels

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Refinishing Factory Aluminum wheels [Re: canuck] #778724 01/10/07 04:45 AM

Joined: Feb 2006

Posts: 93

Lethbridge, Alberta

AUSSiE78

Getting the Wheeling Fever

I have seen some guys use solvent to take off the clearcoat and sand the aluminum to a shine... looks good, LOTS of work. I would like to bead blast it and see what happens to mine.

AUSSiE

'88 4Runner
3.0, mod'd intake, dynomax exhaust, everything else stock.
Life will always go on....

Entire Thread
Subject	Posted By	Posted
Refinishing Factory Aluminum wheels	canuck	01/10/07 04:18 AM
Re: Refinishing Factory Aluminum wheels	AUSSiE78	01/10/07 04:45 AM
Re: Refinishing Factory Aluminum wheels	bkg	01/10/07 05:01 AM
Re: Refinishing Factory Aluminum wheels	willzrunna96	01/10/07 05:13 AM
Re: Refinishing Factory Aluminum wheels	4Crawler	01/10/07 06:42 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.565s Queries: 16 (3.563s) Memory: 0.5991 MB (Peak: 0.6321 MB) Data Comp: Off Server Time: 2026-06-14 19:21:17 UTC
Valid HTML 5 and Valid CSS