Refinishing Factory Aluminum wheels

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Refinishing Factory Aluminum wheels [Re: bkg] #778726 01/10/07 05:13 AM

Joined: Oct 2004

Posts: 1,270

Long Island, NY

willzrunna96 Offline

Body Damage is Cool

spray aircraft remover the remove clear coat, then sand, sand ,sand from course the very fine, then hit it with mother billet alum polsih they will look chrome but expect to spend at least 3 hours per rim

91 pickup 5.29's US GEAR.35x 12.50 trxus m/t.5 speed swap- SOLD!
96 4Runna limited-toytec/OME lift,diff drop Nitto 285/75/16 Elocked=butter
07 FJ cruiser 3" DR coilovers 285/75/16 nitto TG. allpro sliders

Entire Thread
Subject	Posted By	Posted
Refinishing Factory Aluminum wheels	canuck	01/10/07 04:18 AM
Re: Refinishing Factory Aluminum wheels	AUSSiE78	01/10/07 04:45 AM
Re: Refinishing Factory Aluminum wheels	bkg	01/10/07 05:01 AM
Re: Refinishing Factory Aluminum wheels	willzrunna96	01/10/07 05:13 AM
Re: Refinishing Factory Aluminum wheels	4Crawler	01/10/07 06:42 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.552s Queries: 16 (3.550s) Memory: 0.6010 MB (Peak: 0.6340 MB) Data Comp: Off Server Time: 2026-06-17 16:13:05 UTC
Valid HTML 5 and Valid CSS