|
|
|
|
 TJ body lift
#779182
01/11/07 11:14 AM
|
Joined: Mar 2004
Posts: 64
OP
Getting the Wheeling Fever
|
Which should be the external diameter and the hole diameter of the spacers for a TJ body lift?
|
|
|
Re: TJ body lift
[Re: georgek]
#779183
01/12/07 08:37 AM
|
Joined: Mar 2004
Posts: 64
OP
Getting the Wheeling Fever
|
Hello everybody!
A friend of me has recently buy a TJ Golden Eagle and he wants to set 33' tyres. He has a 1.5' suspension lift but it seems to be necessary a body lift in order to avoid the trimming.
Does anybody know thich should be the dimensions of the spacers for a 1.5' body lift? (external diameter and hole diameter).
|
|
|
Re: TJ body lift
[Re: georgek]
#779184
01/12/07 07:25 PM
|
Joined: Oct 2002
Posts: 466
Mudrunner
|
Are you making your own?
I dont know, but I imagine if you put a caliper on one of the body mounts that would tell you the outside, and if you pull a bolt out you could see how big a hole you need.
Josh
80 CJ-7.
It runs
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5905 MB (Peak: 0.6441 MB) Data Comp: Off Server Time: 2026-06-23 22:58:11 UTCValid HTML 5 and Valid CSS 
