Quote
The long ones are the pushrods... In the egg box are the rockers and rockerballs.. Do the rockerballs still have oil grooves in them?
Never mix em up! You are doing good.
I have been told a standard coolant pump will pump 20 gals a minute at max rpm.. I never have seen it though.
Big JIm <img src="/forums/images/graemlins/pfft.gif" alt="" />


Not sure, I looked them over for obvious cracks or damage and they all look good to me. Other than that.

Do you know a good source or parts list for all the vacume lines that I broke. I broke 3 of them but they were brittle as hell. I'm wondering if some people just use regular hose. Seems to me it would do the same job. The one i'm dreading replacing goes into the firewall, i'm assuming to the heater controls.

Either way 1/2" breaker bar will get the head off tomorrow.

One good thing from all of this is I planned on replacing the exaust manifold with a header I got from quadratec. The only one had some cracks in it so this gets me to do it.

93 Wrangler
4.0L (remanufactured from S&S about 5 years ago)
Mostly stock