|
|
|
|
 longer wheel studs!
#781723
01/20/07 04:17 AM
|
Joined: Oct 2004
Posts: 1,270
OP
Body Damage is Cool
|
help i need to get longer wheels studs for my 4runner...being that all toyota 4x4's are the same i figured i post in here..plus you guys rock.....
I had to add small spacers to my hubs to clearence my rims and calipers now i only get 4 turns of the lug on the stud to 80 ft lbs...does anyone know what other studs i could use...so far i have found that the stock knurl is 14.2 and the length is 40mm.. i need about 50mm anyone know anything that would work...i dont care if i need to goto 1/2x20
91 pickup 5.29's US GEAR.35x 12.50 trxus m/t.5 speed swap- SOLD!
96 4Runna limited-toytec/OME lift,diff drop Nitto 285/75/16 Elocked=butter
07 FJ cruiser 3" DR coilovers 285/75/16 nitto TG. allpro sliders
|
|
|
Re: longer wheel studs!
[Re: 4Crawler]
#781725
01/20/07 06:34 AM
|
Joined: Oct 2004
Posts: 1,270
OP
Body Damage is Cool
|
hey rodger would you happen to know a part number with the right knurl.... also would grinding down the caliper persay be a bad idea
91 pickup 5.29's US GEAR.35x 12.50 trxus m/t.5 speed swap- SOLD!
96 4Runna limited-toytec/OME lift,diff drop Nitto 285/75/16 Elocked=butter
07 FJ cruiser 3" DR coilovers 285/75/16 nitto TG. allpro sliders
|
|
|
Re: longer wheel studs!
[Re: willzrunna96]
#781726
01/20/07 06:42 AM
|
Joined: Jan 2000
Posts: 12,153
Web Wheeler
|
The 610-073 are 2-3/8" long and the knurls press into Toyota hub. Also a 610-144 2-7/8" long. The first works w/ 3/4" spacers on the rea axle and the longer one works on the front w/ 3/4" spacer.
|
|
|
Re: longer wheel studs!
[Re: 4Crawler]
#781727
01/20/07 06:55 AM
|
Joined: Oct 2004
Posts: 1,270
OP
Body Damage is Cool
|
YOU ARE THE MAN....Also i found a stud for a rear or a toyota matrix that has the same knurl as stock toyota studs....same m12 1.5 but the shoulder length is considerably longer. by about 15mm do you think this will make a difference if im using 1/4 spacers?
91 pickup 5.29's US GEAR.35x 12.50 trxus m/t.5 speed swap- SOLD!
96 4Runna limited-toytec/OME lift,diff drop Nitto 285/75/16 Elocked=butter
07 FJ cruiser 3" DR coilovers 285/75/16 nitto TG. allpro sliders
|
|
|
Re: longer wheel studs!
[Re: willzrunna96]
#781728
01/20/07 07:09 AM
|
Joined: Oct 2004
Posts: 1,270
OP
Body Damage is Cool
|
|
91 pickup 5.29's US GEAR.35x 12.50 trxus m/t.5 speed swap- SOLD!
96 4Runna limited-toytec/OME lift,diff drop Nitto 285/75/16 Elocked=butter
07 FJ cruiser 3" DR coilovers 285/75/16 nitto TG. allpro sliders
|
|
|
Re: longer wheel studs!
[Re: willzrunna96]
#781729
01/20/07 05:45 PM
|
Joined: Jan 2000
Posts: 12,153
Web Wheeler
|
You would likely have to measure and see. I know with the longer studs I have, I must run the spacer as the shoulder is too long to allow the wheel to fit without the spacer.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 2.897s Queries: 15 (0.004s) Memory: 0.6219 MB (Peak: 0.7125 MB) Data Comp: Off Server Time: 2026-06-17 17:53:16 UTCValid HTML 5 and Valid CSS 
