OK today I am not as excited as yesterday (no trembling hands and stuff...), so I have more time to evaluate the program. I have found the windows installer so the program works normally under windows without any problems (at least on win2000). All the functions work, all the diagrams print out easily etc. The program is for models until 06.1999 but I have checked one model from 2000 and still no problem (they can't have changed much in parts and part numbers, it's a 3rd.gen. after all). All the files weigh 500MB after zipping. The installation program allows to copy the files onto the harddisk to eliminate fussing with CDs (but one set of CDs needs to be made in order to install the program). I am currently uploading the program to http://ftp.lawvision.net as I had no problems with that server. My transfer is 13kb/s at maximum so it will take me some 10-15 hours to upload (I use much of the bandwidth for my regular browsing and P2P software so the real traffic is around 6kb/s). Do not visit the server until I give you the information that the file is uploaded, otherwise you may be downloading a non-functioning (unfinished)zip file.