87 xtra cab headlight wiring harness

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

87 xtra cab headlight wiring harness #781946 01/21/07 07:15 AM

Joined: Jan 2007

Posts: 241

Aurora, Ontario

canuck

Wheeler

Recently I read an article about replacing the wiring harness and in some cases after this change you get better performance from your headlights. Is this because the factory harness gauge is too small causing voltage drop. If this is the case would it be worth while making your own harness with heavier gauge wire or just buy a new harness.

Keep the Shiney Side up. Support our troops.

Entire Thread
Subject	Posted By	Posted
87 xtra cab headlight wiring harness	canuck	01/21/07 07:15 AM
Re: 87 xtra cab headlight wiring harness	matts	01/21/07 07:37 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.795s Queries: 15 (3.793s) Memory: 0.5924 MB (Peak: 0.6254 MB) Data Comp: Off Server Time: 2026-05-31 01:26:29 UTC
Valid HTML 5 and Valid CSS