Front wheel bearing race?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Front wheel bearing race? [Re: fasteddy] #782079 01/22/07 04:16 AM

Joined: Nov 2002

Posts: 4,127

La Mesa, CA

DaphneD

Roll Me Over

IIRC, there might be an edge inside the spindle which can be mistaken for the bearing race if you're not careful. I seem to remember denting it the first time I attempted this procedure. Tap (pound) the bearing race out using a triangular pattern for strike points. That should knock them loose pretty easily.

Entire Thread
Subject	Posted By	Posted
Front wheel bearing race?	silver94sr	01/21/07 10:53 PM
Re: Front wheel bearing race?	LandRaider	01/21/07 11:57 PM
Re: Front wheel bearing race?	silver94sr	01/22/07 12:04 AM
Re: Front wheel bearing race?	LandRaider	01/22/07 12:56 AM
Re: Front wheel bearing race?	sparkem	01/22/07 01:33 AM
Re: Front wheel bearing race?	fasteddy	01/22/07 01:36 AM
Re: Front wheel bearing race?	DaphneD	01/22/07 04:16 AM
Re: Front wheel bearing race?	silver94sr	01/22/07 04:57 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.583s Queries: 16 (3.581s) Memory: 0.6079 MB (Peak: 0.6409 MB) Data Comp: Off Server Time: 2026-06-20 12:36:15 UTC
Valid HTML 5 and Valid CSS