rebuilding Aisin hubs

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: rebuilding Aisin hubs [Re: Stephan_Botswana] #782403 01/25/07 05:42 PM

Joined: Mar 2005

Posts: 245

canada

rodeoredd

Wheeler

i used bruce andersons write up (linked above), i had never even seen a manual hub before until my new (used) ones arrived all blown to bits in a box.

took me a few hours, but i got them reassembled.

'99 Rodeo V6 4x4 w/ 8" lift, 33" TrXus MT
4.77, Aussie Locked rear, 8500lb winch, custom rack, custom winch bumper, ProComp lights, 230,000km
http://www.cardomain.com/ride/2231794

Entire Thread
Subject	Posted By	Posted
rebuilding Aisin hubs	nirvroxx	01/23/07 02:19 AM
Re: rebuilding Aisin hubs	pucci	01/23/07 03:35 AM
Re: rebuilding Aisin hubs	DieselBob	01/23/07 02:37 PM
Re: rebuilding Aisin hubs	skibumintahoe	01/25/07 10:49 AM
Re: rebuilding Aisin hubs	randii	01/25/07 10:55 AM
Re: rebuilding Aisin hubs	Stephan_Botswana	01/25/07 04:40 PM
Re: rebuilding Aisin hubs	rodeoredd	01/25/07 05:42 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.657s Queries: 16 (3.654s) Memory: 0.6041 MB (Peak: 0.6371 MB) Data Comp: Off Server Time: 2026-05-31 18:36:59 UTC
Valid HTML 5 and Valid CSS