hi-lift problem?!

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

hi-lift problem?! #784538 01/30/07 04:27 AM

Joined: Oct 2004

Posts: 1,270

Long Island, NY

willzrunna96 Offline

Body Damage is Cool

just bought a new 48" cast/steel hi-lift i have noticed that you need to keep upward pressure and the lever that is used to engage the jack and disengage it in order for the jack to lift something...is this normal?

91 pickup 5.29's US GEAR.35x 12.50 trxus m/t.5 speed swap- SOLD!
96 4Runna limited-toytec/OME lift,diff drop Nitto 285/75/16 Elocked=butter
07 FJ cruiser 3" DR coilovers 285/75/16 nitto TG. allpro sliders

Entire Thread
Subject	Posted By	Posted
hi-lift problem?!	willzrunna96	01/30/07 04:27 AM
Re: hi-lift problem?!	87Toy4x4	01/30/07 04:31 AM
Re: hi-lift problem?!	OOP'S	01/30/07 05:32 AM
Re: hi-lift problem?!	kewlynx	01/30/07 05:28 AM
Re: hi-lift problem?!	Dandeman	01/30/07 02:11 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.667s Queries: 15 (3.665s) Memory: 0.6005 MB (Peak: 0.6335 MB) Data Comp: Off Server Time: 2026-06-18 00:11:31 UTC
Valid HTML 5 and Valid CSS