here's a few pictures of some different trailer light converters.

most say on them what wires go where.



rule of thumb.

green is right turn

yellow is left turn

brown is tail

white is ground

normally the brake light is the same as the blinker and it will just send juice through those green and yellow wires.

in order to combine your seperate blinker and tail you will need to use one of these

on one side there are either

A: all wires

B: just the green and yellow.

on the recieving end you will notice that there is one extra wire.

a red one.

this can be any odd color but in this case it is red.


you hook your brake light on the truck side to the red wire and the blinkers to the green and yellow and it combines it in the box

you will need to mount the box on one side of the truck
(preferably the side that the wires are coming down frame)
and run one wire, normally the green one, over to the right side of the truck for the right blinker/brake.

pretty simple really.

you would probably be able to figure it out without me wasting my time typing this! but hey its fun right? <img src="/forums/images/graemlins/shiner.gif" alt="" />