Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
2.6l Engine coolant temp sensor location ?????? #786477 02/04/07 07:07 PM
Joined: Aug 2006
Posts: 25
G
Goose Offline OP
Getting the Wheeling Fever
Looking for the sensor on a 2.6l i want to disconect it so the engine will run on open loop.
Where is it and what does it look like????? <img src="/forums/images/graemlins/cheers.gif" alt="" />

Re: 2.6l Engine coolant temp sensor location ?????? [Re: Goose] #786478 02/05/07 12:56 PM
Joined: Apr 2003
Posts: 1,994
Bansil Offline
Body Damage is Cool
it's on passengerside of the intake,it has 1/4" spade connector and is about 1/2" long and about 12mm nut.
This on the amigo 2.6
hope this helps.





98 Rodeo(hers)
00 Rodeo(his)

Lisa's Rodeo
Re: 2.6l Engine coolant temp sensor location ?????? [Re: Goose] #786479 02/05/07 01:55 PM
Joined: Nov 2005
Posts: 17
H
hellbound Offline
Need a Spot
This mite be a silly question but why on earth would you want to do that??

Adam.

Re: 2.6l Engine coolant temp sensor location ?????? [Re: hellbound] #786480 02/07/07 06:01 AM
Joined: Aug 2006
Posts: 25
G
Goose Offline OP
Getting the Wheeling Fever
Well, my truck has a missfire due to low compression, now
here is the deal when it is cold and i start the truck it runs ok till the coolant temp sensor kicks in. Now what that does (if you dont know) is it keeps it running rich, the idea is the ecm thinks the engine is cold and feeds more fuel,
This is just so i can get around till i can fix the miss fire.








4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.6009 MB (Peak: 0.6558 MB) Data Comp: Off Server Time: 2026-05-29 21:23:02 UTC
Valid HTML 5 and Valid CSS