How to remove lower ball joint!!!!!!!

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: How to remove lower ball joint!!!!!!! [Re: VOLTRON] #786516 02/09/07 01:29 PM

Joined: Nov 2006

Posts: 25

Virginia

throwin_roost Offline

Getting the Wheeling Fever

Thanks for all your help guys. Pulling the axle out of the hub a bit did the trick.

93 Rodeo 3.2L, 3" body lift, 3" Indy4x lift on 33's, flowmaster50, stainless brakes and clutch lines,

Entire Thread
Subject	Posted By	Posted
How to remove lower ball joint!!!!!!!	throwin_roost	02/04/07 10:00 PM
Re: How to remove lower ball joint!!!!!!!	strawmyers	02/04/07 10:21 PM
Re: How to remove lower ball joint!!!!!!!	throwin_roost	02/05/07 12:32 PM
Re: How to remove lower ball joint!!!!!!!	94rodeo	02/07/07 06:09 AM
Re: How to remove lower ball joint!!!!!!!	VOLTRON	02/08/07 07:45 PM
Re: How to remove lower ball joint!!!!!!!	throwin_roost	02/09/07 01:29 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.590s Queries: 16 (3.430s) Memory: 0.6033 MB (Peak: 0.6363 MB) Data Comp: Off Server Time: 2026-06-03 20:09:58 UTC
Valid HTML 5 and Valid CSS