|
|
|
|
Re: Some cylinder surface rust specks while doing head gasket... What to do?
[Re: toowacky]
#786651
02/06/07 03:07 AM
|
Joined: Sep 2004
Posts: 1,015
Body Damage is Cool
|
i was kinda paranoid after leaving my engine bare for 3 weeks waiting on a machine shop with my head for the same reason.. rust/corrosion spots here and there on the rocker arm ass'y and on the block + stuff.
to make myself feel better i ran the engine really hot the first startup and chainged the oil + filter shortly after. then changed oil + filter again after 500 miles when re-adjusted valves + re-torqued head.
i wouldn't worry *too* much tho. rest assured.
... no really. get some sleep. <img src="/forums/images/graemlins/notooth.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" />
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 4.148s Queries: 16 (4.145s) Memory: 0.6023 MB (Peak: 0.6353 MB) Data Comp: Off Server Time: 2026-11-16 00:58:48 UTCValid HTML 5 and Valid CSS