|
|
|
|
Re: 1990 toyota rear end problem
[Re: bluyota]
#787393
02/07/07 09:47 PM
|
Joined: Feb 2007
Posts: 13
Need a Spot
|
i totaly agree check it while u got her out and see how much flid u lost first by pulling fill plug see if u can feel lube with ur pinky if not diff dammage may have taken place already ! <img src="/forums/images/graemlins/frown.gif" alt="" /> also if seal did blow out take out breater fitting on top of axle and blow out with compresed air to make sure it's venting other wise it'll blow again or worse blow out axle seals <img src="/forums/images/graemlins/frown.gif" alt="" /> <img src="/forums/images/graemlins/kewl.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" /> good luck shannon
Shannon 84 toy 7"lift 35"tires 4.88gears det. lockers 320hp smallblock chevy th350 auto trans on baurd air snorkle on baurd welder 8000lb winch custom rear bumber nerf bars
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.528s Queries: 16 (3.525s) Memory: 0.6076 MB (Peak: 0.6406 MB) Data Comp: Off Server Time: 2026-06-04 23:49:18 UTCValid HTML 5 and Valid CSS