|
|
|
|
Re: eguus gages
[Re: aptech]
#788503
02/11/07 09:38 AM
|
Joined: Aug 2004
Posts: 202
Wheeler
|
the directions are in the box with the guages. be very gental with the water guage wire if you bend it to hard and it gets pinched off it will not work. when you route the oil line make sure that it is protected from every thing. if it gets even a pin hole puncture it will drain almost all of the oil in your engine in about 30 seconds flat. and 4 quarts of oil on your floor board really sucks.
they are good guages just be smart when you route all the wires through the fire wall. i would have pictures but i have only used them on mt SB'ed toyotas and i have gotten rid of all of those trucks, faith in the 22re runs strong now a days.
92' Pick-up, SAS, gears to make her crawl, 37's , bullet proof motor, and alot of time invested. 06 CRF450R one mean roost flinging machine
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.520s Queries: 16 (3.518s) Memory: 0.5968 MB (Peak: 0.6298 MB) Data Comp: Off Server Time: 2026-06-13 05:16:32 UTCValid HTML 5 and Valid CSS