|
|
 The Official Part Flyboys Sportage thread LAST DAYS
#788580
02/11/07 08:25 PM
|
Joined: Jun 2005
Posts: 477
OP
Mudrunner
|
ok, here goes, 1998 sportage ex.
so far the pass visor is sold pending payment.
i have an offer on the block. i will seperate the exhaust. there will be the downpipe and 2.5" cat, then the 2.25 catback for sale. the head i belive is pending. both intake manifolds and throttlebodies i will hold until i can properly finish porting them. everything else is up for grabs. shocks are kyb and have around 1500 miles on them, so do the rims and tires (30's) except for the pms i already recived, lets keep in in this thread to make it easier on all of us.
1995 nissan maxima se, 5spd short throw, aluminum flywheel and crank pully, stage 3 clutch, custom ported top end, full 2.5 exhaust jdm front end
|
|
 Re: The Official Part Flyboys Sportage thread
[Re: flyboy367]
#788581
02/11/07 09:24 PM
|
Joined: Aug 2006
Posts: 1,224
Body Damage is Cool
|
I would like the dash switch for the cruise control, and the switch on the steering column. I am also interested in the shocks. I don't know what any of this is worth so please PM me for $ on these or answer in a thread.
Thanks,
Everet
WWW.UPYOURKIA.COM White 96,4x4, man.hubs,K&N filter,3row rad, twin 16" fans, 3" body lift, 4" UPYOURKIA LIFT KIT,265/75 16 TreadWrights on DC2 wheels,140 amp alt. dual batts.
|
|
|
Re: The Official Part Flyboys Sportage thread
[Re: Everet]
#788582
02/11/07 10:01 PM
|
Joined: Jun 2005
Posts: 477
OP
Mudrunner
|
just to be specific ev, the cruise switches i know, you want the turn signal switch and the wiper switch too? if thats the case i wonder if no one wants the column would it make it easier to just take the wheel off and cut the column out to ship instead of lots of removal. save us both i think
1995 nissan maxima se, 5spd short throw, aluminum flywheel and crank pully, stage 3 clutch, custom ported top end, full 2.5 exhaust jdm front end
|
|
|
Re: The Official Part Flyboys Sportage thread
[Re: flyboy367]
#788583
02/11/07 11:27 PM
|
Joined: May 2005
Posts: 208
Wheeler
|
i'm interested in the two front seat belt plug-ins, and possibly a clutch master and slave if you can get em here pronto. Did yours have a lift? also interested in the washer fluid resivior if itll fit in the '95 SOHC. what color? might like the drivers door... 
|
|
|
Re: The Official Part Flyboys Sportage thread
[Re: dorkpunch]
#788584
02/12/07 12:21 AM
|
Joined: Jun 2005
Posts: 477
OP
Mudrunner
|
seat belt plugs are no problem. the washer res i dont know if it will fit or not. mine is an auto so no clutch stuff. yes its lifted with a 1 3/4 body lift. the color is green. im not sure where you are though so i dont know what shipping on a door will be. if you want the lift let me know. as for the belt clips and the washer res, hows $40 shipped? this is the color. ![[Linked Image]](http://i6.photobucket.com/albums/y245/flyboy367/KIA/P1010469.jpg)
1995 nissan maxima se, 5spd short throw, aluminum flywheel and crank pully, stage 3 clutch, custom ported top end, full 2.5 exhaust jdm front end
|
|
|
Re: The Official Part Flyboys Sportage thread
[Re: flyboy367]
#788585
02/12/07 12:53 AM
|
Joined: May 2005
Posts: 208
Wheeler
|
how much for the body lift? the colors wrong for the door (rats...). can you take a pic of the washer resivior?
thanks,
Doug.
|
|
|
Re: The Official Part Flyboys Sportage thread
[Re: dorkpunch]
#788586
02/12/07 01:14 AM
|
Joined: Jun 2005
Posts: 477
OP
Mudrunner
|
ill try to get a pic tommorrow. the lift kit was $100 new so how about 55 shipped?
1995 nissan maxima se, 5spd short throw, aluminum flywheel and crank pully, stage 3 clutch, custom ported top end, full 2.5 exhaust jdm front end
|
|
|
Re: The Official Part Flyboys Sportage thread
[Re: flyboy367]
#788587
02/12/07 01:22 AM
|
Joined: Aug 2006
Posts: 1,224
Body Damage is Cool
|
just to be specific ev, the cruise switches i know, you want the turn signal switch and the wiper switch too? if thats the case i wonder if no one wants the column would it make it easier to just take the wheel off and cut the column out to ship instead of lots of removal. save us both i think yeah, those and the dash switch, also I'm interested in the shocks. Everet
WWW.UPYOURKIA.COM White 96,4x4, man.hubs,K&N filter,3row rad, twin 16" fans, 3" body lift, 4" UPYOURKIA LIFT KIT,265/75 16 TreadWrights on DC2 wheels,140 amp alt. dual batts.
|
|
|
Re: The Official Part Flyboys Sportage thread
[Re: Everet]
#788588
02/12/07 02:18 AM
|
Joined: Jun 2005
Posts: 477
OP
Mudrunner
|
ok, easiest for me would be to just pull all the shocks and send the fronts with the towers and all. shipping may cost a bit more though. how about for all you asked $400 shipped. if shipping is less then im thinking ill get ya back and if its more ill eat it.
1995 nissan maxima se, 5spd short throw, aluminum flywheel and crank pully, stage 3 clutch, custom ported top end, full 2.5 exhaust jdm front end
|
|
|
Re: The Official Part Flyboys Sportage thread
[Re: flyboy367]
#788589
02/12/07 05:05 AM
|
Joined: Aug 2006
Posts: 598
Rock Warrior
|
fly could you also try to get me a price on the roof rack shipped to canada as well as the head i already asked about. thanks.
|
|
|
|
