IFS mounting for Hi Steer?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: IFS mounting for Hi Steer? [Re: 4Crawler] #788669 02/12/07 02:43 AM

Joined: Nov 2004

Posts: 408

SA/Texas

MnMsToY

Mudrunner

I agree 100%. All I need is to go pick up some 2.5 square tubing. I have everything else to fab the hanger up here at home. I'm going to tack it the way I need it and have a friend weld it up. I don't rust my welding in that department.
Thanks again,
Mike

1980 Toy, Dovetail, Chevy 60/14, 5.13 gears "Wheeling isn't cheap anymore"
http://www.texas4x4.org/gallery/MikesToyota

Entire Thread
Subject	Posted By	Posted
IFS mounting for Hi Steer?	MnMsToY	02/11/07 11:26 PM
Re: IFS mounting for Hi Steer?	4Crawler	02/11/07 11:33 PM
Re: IFS mounting for Hi Steer?	MnMsToY	02/12/07 12:20 AM
Re: IFS mounting for Hi Steer?	4Crawler	02/12/07 12:46 AM
Re: IFS mounting for Hi Steer?	MnMsToY	02/12/07 01:24 AM
Re: IFS mounting for Hi Steer?	4Crawler	02/12/07 02:17 AM
Re: IFS mounting for Hi Steer?	MnMsToY	02/12/07 02:43 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.532s Queries: 16 (3.529s) Memory: 0.6061 MB (Peak: 0.6391 MB) Data Comp: Off Server Time: 2026-06-16 10:27:32 UTC
Valid HTML 5 and Valid CSS