Crankshaft pulley broke (not bolt)

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Crankshaft pulley broke (not bolt) [Re: hotdogx3] #788701 02/12/07 01:24 AM

Joined: Feb 2004

Posts: 568

Durango, CO

TommyM

Rock Warrior

You have to get it from the dealer. . . or from me.

If you want a used one, PM or e-mail me and I can ship it out tomorrow.

Tommy

90 LWB Montero, 270k, 265/75R16, 16x8 ARE Bajas, Budget Lift, Towbar, Aux Brakes (towed with camper), Jotto Desk, remote oil filter
92 bone stock base model beater
Parting out 4 more

Entire Thread
Subject	Posted By	Posted
Crankshaft pulley broke (not bolt)	hotdogx3	02/12/07 01:01 AM
Re: Crankshaft pulley broke (not bolt)	TommyM	02/12/07 01:24 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.527s Queries: 16 (3.525s) Memory: 0.5942 MB (Peak: 0.6272 MB) Data Comp: Off Server Time: 2026-06-17 12:43:52 UTC
Valid HTML 5 and Valid CSS