Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Register Log In 4x4Wire TrailTalk Forums Early Toyota Trucks Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?

Print Thread

Rate Thread

Re: Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E? [Re: toowacky] #788914 02/13/07 01:16 AM

Joined: Feb 2000

Posts: 1,059

Belmont, CA, USA

mosk

Body Damage is Cool

Huh, sure seems like a problem I would have run into, but yet I didn't. Are you running a new valve cover gasket? In any event, it sounds like you've addressed the things that would cause this to be a problem. If everything else checks out I guess you'll need to grind a bit off the inside of the valve cover.

Jeff Moskovitz
1986 turbo 4X4 truck
1998 2.7L/M5 4X4 4Runner

Jeff's 22R-TE page

22RTE Turbo Truck Forum (advertising free)

Entire Thread
Subject	Posted By	Posted
Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?	toowacky	02/12/07 11:13 PM
Re: Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?	4Crawler	02/12/07 11:26 PM
Re: Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?	mosk	02/13/07 12:10 AM
Re: Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?	toowacky	02/13/07 12:54 AM
Re: Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?	mosk	02/13/07 01:16 AM
Re: Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?	kewlynx	02/13/07 04:00 AM
Re: Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?	dcg9381	03/18/07 08:19 AM
Re: Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?	engnbldr	03/18/07 02:51 PM
Re: Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?	MAC	03/18/07 07:49 PM
Re: Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?	engnbldr	03/19/07 01:07 AM
Re: Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?	dcg9381	03/19/07 03:09 AM
Re: Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?	engnbldr	03/19/07 04:59 AM
Re: Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?	BRreddog	03/19/07 03:20 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.463s Queries: 16 (3.473s) Memory: 0.6214 MB (Peak: 0.6544 MB) Data Comp: Off Server Time: 2026-05-30 17:52:08 UTC
Valid HTML 5 and Valid CSS