Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Register Log In 4x4Wire TrailTalk Forums Early Toyota Trucks Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?

Print Thread

Rate Thread

Re: Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E? [Re: MAC] #788919 03/19/07 01:07 AM

Joined: Jun 2003

Posts: 3,576

1800 acre island at the Oregon...

engnbldr

Roll Me Over

Quote

EB, what do you mean by cut a notch?

>>>*In the baffle, or just cut the stud back a little.

My son is fussy, he set up and machined the holdown nut seat back on the rocker stands, then he shortened the stud.

I was always lazy and used my die grinder.. <img src="/forums/images/graemlins/lol.gif" alt="" />..*EB

*Beats the he** outa me!....*LOL**...

Entire Thread
Subject	Posted By	Posted
Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?	toowacky	02/12/07 11:13 PM
Re: Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?	4Crawler	02/12/07 11:26 PM
Re: Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?	mosk	02/13/07 12:10 AM
Re: Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?	toowacky	02/13/07 12:54 AM
Re: Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?	mosk	02/13/07 01:16 AM
Re: Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?	kewlynx	02/13/07 04:00 AM
Re: Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?	dcg9381	03/18/07 08:19 AM
Re: Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?	engnbldr	03/18/07 02:51 PM
Re: Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?	MAC	03/18/07 07:49 PM
Re: Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?	engnbldr	03/19/07 01:07 AM
Re: Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?	dcg9381	03/19/07 03:09 AM
Re: Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?	engnbldr	03/19/07 04:59 AM
Re: Anyone else need to grind the inside valve cover ridge to clear ARP studs on a 22R-E?	BRreddog	03/19/07 03:20 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.799s Queries: 16 (3.797s) Memory: 0.6206 MB (Peak: 0.6535 MB) Data Comp: Off Server Time: 2026-06-04 06:07:40 UTC
Valid HTML 5 and Valid CSS