Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Re: no start problem [Re: BigJim] #788961 02/13/07 07:57 PM
Joined: Feb 2007
Posts: 35
J
jdawg13 Offline OP
Getting the Wheeling Fever
must've happened when i replaced the sensor under the distributor cap and i put it back one tooth off...
i swear it was in the same position,but i have been wrong once before!!!
thanks for all your help
jay

Re: no start problem [Re: jdawg13] #788962 02/13/07 10:04 PM
Joined: Oct 2003
Posts: 7,768
BigJim Offline
Web Wheeler
Ok so you pulled the dist and installed a new pickup and then installed the dist one tooth off... Yep! That'll do it.
Big Jim <img src="/forums/images/graemlins/pfft.gif" alt="" />


professional bovine relocation specialist
Page 2 of 2 1 2

Moderated by  4x4Wire 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.007s Queries: 16 (0.005s) Memory: 0.5917 MB (Peak: 0.6565 MB) Data Comp: Off Server Time: 2026-06-22 15:11:09 UTC
Valid HTML 5 and Valid CSS