|
|
|
|
 Re: Items required for brake job
[Re: Jake97T]
#789018
03/10/07 04:38 PM
|
Joined: Jun 2005
Posts: 447
Mudrunner
|
I just got this http://www.thetoolwarehouse.net/shop/OTC-6612.html as I was looking around for a whole set of large sockets with no luck. Further I didn't know if there is enough clearance for a conventional round-shaped socket. Free shipping is hard to beat, but you have to spend $100. That's getting hard because I have a lot of tools already and Harbor Freight is selling a lot of the "occasional use" stuff I am interested in.
|
|
|
Re: Items required for brake job
[Re: eleet]
#789019
03/10/07 06:54 PM
|
Joined: Feb 2005
Posts: 1,489
Body Damage is Cool
|
a round socket wont fit too well, i used a 2 1/8" socket with a little grinding of the outside of the socket to make it fit better, wouldnt suggest this on a socket that gets used for anything else.
97 FZJ80, Stock, Factory Lockers.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 8.184s Queries: 16 (0.004s) Memory: 0.5931 MB (Peak: 0.6577 MB) Data Comp: Off Server Time: 2026-06-09 11:35:39 UTCValid HTML 5 and Valid CSS 
