I have now decided I am not taking the bottom end apart. I found out that the 50mm pistons in there are .020 over which explains the 3.611 bore measurements I got. Thanks for the help to the 3 people who actually replied with some good inputs out of the 113 people who viewed it. Felt kinda left out on this one. Thanks again.

Well, I am part of those 113 that did look at your post and did not posted anything. <img src="/forums/images/graemlins/shame.gif" alt="" /> <img src="/forums/images/graemlins/smile.gif" alt="" /> I kind off left that job for the experts like the guys that did posted. But, don't worry my friend, the force was with you. <img src="/forums/images/graemlins/lol.gif" alt="" />

I promise that on your next post I will at least give you some encouragement and good vibe. <img src="/forums/images/graemlins/kewl.gif" alt="" />

Hey, this is like family. <img src="/forums/images/graemlins/kewl.gif" alt="" /> we got you covered. <img src="/forums/images/graemlins/cheers.gif" alt="" />

Yeah bro, don't feel bad. I check out all the posts, but I rarely have anything useful to contribute. <img src="/forums/images/graemlins/smile.gif" alt="" />

Thanks for the nice words guys. I was just gettin impatient to get all my parts ordered and do this the right way. It doesnt help that I work nights and was expecting people to post during normal work hours. My bad. Thanks though. Of all the seaching I did this week to get info, I found so many posts that were getting good then just died out and left the guy hanging. I guess its just how forums are sometimes. No big deal. I realy want to thank the people that are always willing to help us new guys out. So thanks guys.