2.6L Bore measurement-Should I get it bored?

Print Thread

Rate Thread

Re: 2.6L Bore measurement-Should I get it bored? [Re: MotoXman] #789127 02/15/07 07:54 PM

Joined: Jan 2007

Posts: 36

MotoXman

Getting the Wheeling Fever

I have now decided I am not taking the bottom end apart. I found out that the 50mm pistons in there are .020 over which explains the 3.611 bore measurements I got. Thanks for the help to the 3 people who actually replied with some good inputs out of the 113 people who viewed it. Felt kinda left out on this one. Thanks again.

87 Dodge Raider M/T 2.6L, Clearwater Head, Pacesetter Header, Weber Carb, Still working on it!

Entire Thread
Subject	Posted By	Posted
2.6L Bore measurement-Should I get it bored?	MotoXman	02/13/07 05:24 PM
Re: 2.6L Bore measurement-Should I get it bored?	Jimbotsi	02/13/07 05:50 PM
Re: 2.6L Bore measurement-Should I get it bored?	MotoXman	02/13/07 05:54 PM
Re: 2.6L Bore measurement-Should I get it bored?	MotoXman	02/13/07 08:40 PM
Re: 2.6L Bore measurement-Should I get it bored?	rxinhed	02/13/07 09:16 PM
Re: 2.6L Bore measurement-Should I get it bored?	fasteddy	02/14/07 01:06 AM
Re: 2.6L Bore measurement-Should I get it bored?	rxinhed	02/14/07 01:53 AM
Re: 2.6L Bore measurement-Should I get it bored?	Engine_Machine_Ser	02/14/07 05:14 AM
Re: 2.6L Bore measurement-Should I get it bored?	MotoXman	02/14/07 08:08 AM
Re: 2.6L Bore measurement-Should I get it bored?	MotoXman	02/15/07 07:27 AM
Re: 2.6L Bore measurement-Should I get it bored?	MotoXman	02/15/07 07:54 PM
Re: 2.6L Bore measurement-Should I get it bored?	JAVYPRO	02/15/07 11:03 PM
Re: 2.6L Bore measurement-Should I get it bored?	stony-man	02/16/07 02:38 AM
Re: 2.6L Bore measurement-Should I get it bored?	MotoXman	02/16/07 06:50 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: