Water pump replacement

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Water pump replacement [Re: kewlynx] #789154 02/14/07 04:53 PM

Joined: May 2006

Posts: 32

Utah

trickster

Getting the Wheeling Fever

Thanks for the tips, got it done last nite, letting the silicone set up today, and will refill the coolant tonite after work. Kewlynx, the FSM doesnt list a torque spec, but my Clymer manual does (8-11 ft/lbs). I am curious why the recomendation for sealer on the bolt threads, it does not appear any are actually in water passages, though they are near.

Entire Thread
Subject	Posted By	Posted
Water pump replacement	trickster	02/13/07 07:20 PM
Re: Water pump replacement	Staceman	02/13/07 07:24 PM
Re: Water pump replacement	TimsToyo	02/14/07 02:02 AM
Re: Water pump replacement	kewlynx	02/14/07 03:11 AM
Re: Water pump replacement	trickster	02/14/07 04:53 PM
Re: Water pump replacement	TimsToyo	02/14/07 06:08 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.781s Queries: 16 (3.778s) Memory: 0.6028 MB (Peak: 0.6358 MB) Data Comp: Off Server Time: 2026-06-08 17:41:39 UTC
Valid HTML 5 and Valid CSS