switchin an auto to standard

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: switchin an auto to standard [Re: kewlynx] #789222 06/03/07 03:45 AM

Joined: Jun 2004

Posts: 189

Oklahoma City

dieseltrooper Offline

Wheeler

I'm resurrecting this one to ask about the same drill on an 87 'Runner using an 83 4x4 as the donor. I'm mostly worried about driveshafts. Should I just get out the tape?? Any issues using the 83 5spd and case?? Thx

Entire Thread
Subject	Posted By	Posted
switchin an auto to standard	Anonymous	02/13/07 11:41 PM
Re: switchin an auto to standard	ToyinAround	02/14/07 03:37 AM
Re: switchin an auto to standard	bodo	02/14/07 04:02 AM
Re: switchin an auto to standard	willzrunna96	02/14/07 05:24 AM
Re: switchin an auto to standard	kewlynx	02/14/07 06:44 AM
Re: switchin an auto to standard	dieseltrooper	06/03/07 03:45 AM
Re: switchin an auto to standard	trcdrunner	06/04/07 05:34 AM
Re: switchin an auto to standard	kewlynx	06/04/07 05:59 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.413s Queries: 16 (3.411s) Memory: 0.6080 MB (Peak: 0.6410 MB) Data Comp: Off Server Time: 2026-06-02 18:34:44 UTC
Valid HTML 5 and Valid CSS