Grinding Noise Behind Cab

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Grinding Noise Behind Cab #789487 02/15/07 04:07 AM

Joined: Apr 2006

Posts: 658

Honeoye NY

wsquaredodie Offline

Rock Warrior

If it is an axle bearing, do a hard left / right while at 30-40 mph. A bad carrier bearing will sound off under load and not when unloaded. Another possibility is the rear end itself. Check your gear oil for metallic paticles and see if there is excessive play in the pinion / ring lash.

trafdlo

Entire Thread
Subject	Posted By	Posted
Grinding Noise Behind Cab	Anonymous	02/14/07 10:57 PM
Re: Grinding Noise Behind Cab	Jake97T	02/15/07 03:38 AM
Re: Grinding Noise Behind Cab	wsquaredodie	02/15/07 04:02 AM
Re: Grinding Noise Behind Cab	wsquaredodie	02/15/07 04:07 AM
Re: Grinding Noise Behind Cab	adam	02/15/07 04:18 AM
Re: Grinding Noise Behind Cab	wawsee	03/28/07 06:20 AM
Re: Grinding Noise Behind Cab	hiroshi	04/05/07 06:20 AM
Re: Grinding Noise Behind Cab	hiroshi	04/05/07 06:21 AM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.681s Queries: 15 (3.410s) Memory: 0.6070 MB (Peak: 0.6400 MB) Data Comp: Off Server Time: 2026-06-01 16:16:47 UTC
Valid HTML 5 and Valid CSS