Proper method to clean EGR valve. 2nd gen 3vze

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Proper method to clean EGR valve. 2nd gen 3vze [Re: 1994Runner4X4] #789534 02/15/07 10:59 AM

Joined: Jan 2001

Posts: 11,595

Cincinnati, OH

Adam F

Forum Moderator

I'd just use some carb cleaner and maybe some pipe cleaners or some sort of spiral brush to get up in the tubes. Just be careful when removing it. I snapped mine right at the valve when I removed mine. That big nut was on there good, and I pulled too hard and snapped it.

88 4R, 350 V8, R150 5 speed Sold <...uot; />
97 4R, stock, daily driver
98 Sienna, kid and dog hauler, wife's ride

Entire Thread
Subject	Posted By	Posted
Proper method to clean EGR valve. 2nd gen 3vze	1994Runner4X4	02/15/07 01:39 AM
Re: Proper method to clean EGR valve. 2nd gen 3vze	Adam F	02/15/07 10:59 AM
Re: Proper method to clean EGR valve. 2nd gen 3vze	Rusty Davis	02/23/07 03:46 AM
Re: Proper method to clean EGR valve. 2nd gen 3vze	1994Runner4X4	02/25/07 12:11 AM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.010s Queries: 16 (4.006s) Memory: 0.5982 MB (Peak: 0.6312 MB) Data Comp: Off Server Time: 2026-11-04 22:59:24 UTC
Valid HTML 5 and Valid CSS