1996 Tacoma 4 cyl to V-6 conversion

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

1996 Tacoma 4 cyl to V-6 conversion #789894 02/16/07 05:58 AM

Joined: Nov 2005

Posts: 9

mollydawg

Need a Spot

I'm thinking of retiring my 300,000 mile 2.7 and am considering a 4.0 V-6 replacment. Anyone done this? Any info on doing that conversion into a '96 with 5-spd? Or even an automatic conversion maybe from a later model Taco?

'96 Taco 4x4 2.7 with 270,000 miles and climbing

Entire Thread
Subject	Posted By	Posted
1996 Tacoma 4 cyl to V-6 conversion	mollydawg	02/16/07 05:58 AM
Re: 1996 Tacoma 4 cyl to V-6 conversion	Flannelman	02/17/07 05:27 AM
Re: 1996 Tacoma 4 cyl to V-6 conversion	Greg_Canada	02/18/07 03:47 AM
Re: 1996 Tacoma 4 cyl to V-6 conversion	TacoTex	02/28/07 02:55 AM
Re: 1996 Tacoma 4 cyl to V-6 conversion	Greg_Canada	03/02/07 05:09 AM
Re: 1996 Tacoma 4 cyl to V-6 conversion	TacoTex	03/19/07 04:26 PM
Re: 1996 Tacoma 4 cyl to V-6 conversion	kewlynx	03/20/07 01:44 AM

Moderated by 4x4Wire, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.546s Queries: 15 (3.544s) Memory: 0.6053 MB (Peak: 0.6383 MB) Data Comp: Off Server Time: 2026-07-15 21:13:21 UTC
Valid HTML 5 and Valid CSS