The friggen upper arm bolt again

Print Thread

Rate Thread

Re: The friggen upper arm bolt again [Re: bretwalda] #790858 02/19/07 08:53 PM

Joined: Jan 2001

Posts: 3,876

Oakwood, IL

Tag

Roll Me Over

Ah? Why would the pitch make any difference if you change the nut to match as well? Or is the nut welded in place on a genII

89 2dr 3.0 AT, manual hubs. 33x12.5 MT
gen 2 coils,Cranked front tbars
Dons rocker protection, Front/Rear Bumpers. ARB rear locker, 2" BL, Beefed up skid plates/trailing arms. Gen II uca, 2 Bouncy seats www.youtube.com/TagGeorge

Entire Thread
Subject	Posted By	Posted
The friggen upper arm bolt again	bretwalda	02/19/07 08:39 PM
Re: The friggen upper arm bolt again	Tag	02/19/07 08:53 PM
Re: The friggen upper arm bolt again	bretwalda	02/19/07 08:57 PM
Re: The friggen upper arm bolt again	CapnCrunch	02/19/07 09:10 PM
Re: The friggen upper arm bolt again	Tag	02/19/07 09:15 PM
Re: The friggen upper arm bolt again	off-roader	02/20/07 04:32 AM
Re: The friggen upper arm bolt again	Chris009	02/20/07 06:04 AM
Re: The friggen upper arm bolt again	guzzilapd	02/20/07 11:49 AM
Re: The friggen upper arm bolt again	bretwalda	02/21/07 06:48 AM
Re: The friggen upper arm bolt again	FrankR	02/21/07 02:17 PM
Re: The friggen upper arm bolt again	bretwalda	03/02/07 04:25 PM
Re: The friggen upper arm bolt again	Winston	03/02/07 05:49 PM
Re: The friggen upper arm bolt again	toddstidham1	03/02/07 07:46 PM
Re: The friggen upper arm bolt again	shadowgear	02/21/07 06:59 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: