Center Support Bearing

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Center Support Bearing #791487 02/21/07 04:25 AM

Joined: Feb 2005

Posts: 89

God's Country

Wing_Nut_OOA Offline

Getting the Wheeling Fever

the mount for the bearing that is welded to the crossmember has been mutilated by the drivline breaking and slamming around.

so i really wasnt sure which way the tabs went.

Entire Thread
Subject	Posted By	Posted
Center Support Bearing	Wing_Nut_OOA	02/21/07 03:28 AM
Re: Center Support Bearing	Wing_Nut_OOA	02/21/07 04:14 AM
Re: Center Support Bearing	Anonymous	02/21/07 04:20 AM
Re: Center Support Bearing	Wing_Nut_OOA	02/21/07 04:25 AM
Re: Center Support Bearing	Wing_Nut_OOA	02/21/07 05:23 AM
Re: Center Support Bearing	Wing_Nut_OOA	02/23/07 12:47 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.456s Queries: 15 (4.453s) Memory: 0.6028 MB (Peak: 0.6358 MB) Data Comp: Off Server Time: 2026-10-23 08:17:29 UTC
Valid HTML 5 and Valid CSS