High steer arms

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: High steer arms [Re: 4Crawler] #791609 03/03/07 03:44 AM

Joined: Nov 2004

Posts: 408

SA/Texas

MnMsToY

Mudrunner

sent you a pm before I read this post.
Thanks I think I will go with the 12 gauge steel. I think it is a little thicker the 1/4 inch.
Mike

1980 Toy, Dovetail, Chevy 60/14, 5.13 gears "Wheeling isn't cheap anymore"
http://www.texas4x4.org/gallery/MikesToyota

Entire Thread
Subject	Posted By	Posted
High steer arms	MnMsToY	02/21/07 04:50 PM
Re: High steer arms	DirtyHarry	02/21/07 06:53 PM
Re: High steer arms	bkg	02/21/07 07:12 PM
Re: High steer arms	missouriman	02/22/07 04:23 AM
Re: High steer arms	MnMsToY	03/02/07 12:23 PM
Re: High steer arms	MnMsToY	03/03/07 02:04 AM
Re: High steer arms	4Crawler	03/03/07 03:38 AM
Re: High steer arms	MnMsToY	03/03/07 03:44 AM
Re: High steer arms	OOP'S	03/03/07 04:57 AM
Re: High steer arms	MnMsToY	03/03/07 05:14 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.883s Queries: 16 (3.881s) Memory: 0.6115 MB (Peak: 0.6444 MB) Data Comp: Off Server Time: 2026-06-14 18:48:39 UTC
Valid HTML 5 and Valid CSS